Used Wood Working Equipment Newsgroup

Location: USA, WEST COAST

ORMA, "PM/AIR 30/14", Membrane Press, PM-010275.
• Hydraulic Membrane Press, automatic loading & unloading table at each end, belt conveyor principal which shuttles laid up components, face-down on top of overlay material into Press. • 2-Stage cycle with new load into Press and finished load out on opposite end, then new load layup and the same in reverse direction. • Designed to form veneers, PVC or vinyl overlay over shaped components. Ideal for thicker overlay material, especially veneer; works with or without membrane. • Welded beam structure, upstroke design; hydraulically operated lower platens with self-contained hydraulic pump, hydraulic locking of the lower platens. • Automatic proportional hydraulic pressure system to equal force on the flange during the pressure cycle; solid steel upper platens are cross-drilled for electric heating elements and vacuum/pressure ports. • Includes: Easy access ''quick change'' membrane kit and air storage tank above the Press. • Touch-screen operator interface with PLC sequence, includes temperature, pressure, cycle times, and self-diagnostics. • Inside flange dimensions of 52.7 in. x 111.8 in. (1,338 x 2,840 mm); max. panel thickness of 2.4 in. (60 mm); max. panel dimension of 48.9 in. x 108.27 in. (1,240 x 2,750 mm). • Max. total thrust of 220 tons, max. specific pressure of 72 PSI (5 kG sq/cm). • Heating system capacity of 302° F - 14.4 kW. • Complete with: Air Heat Exchanger (3 kW) and Vacuum Pump (2.4 kW), max. vacuum of 0.5 m/bar. – [PM-010275] Press is ''like new'' with only (160) hours of production time! YMFG - 2006 FOB – West Coast USA Excellent Condition USD 109,000